You're viewing a previously published revision of this guide. View latest revision

Oct 31, 2021 - 10:10:21

Mar 28, 2025 - 01:03:31 Jan 27, 2025 - 02:01:09 Sep 09, 2024 - 05:09:50 Sep 09, 2024 - 03:09:51 Sep 09, 2024 - 03:09:23 Sep 09, 2024 - 03:09:18 Sep 09, 2024 - 03:09:52 Sep 09, 2024 - 03:09:43 Sep 09, 2024 - 03:09:31 Sep 09, 2024 - 03:09:16 Sep 09, 2024 - 03:09:53 Sep 06, 2024 - 03:09:34 Sep 06, 2024 - 03:09:20 Oct 17, 2022 - 12:10:47 Nov 16, 2021 - 06:11:32 Nov 16, 2021 - 06:11:34 Oct 31, 2021 - 10:10:32 Oct 31, 2021 - 10:10:34 Oct 31, 2021 - 10:10:42 Oct 31, 2021 - 10:10:53 Oct 31, 2021 - 10:10:06 Oct 31, 2021 - 10:10:12 Oct 31, 2021 - 10:10:01 Oct 31, 2021 - 10:10:11 Oct 31, 2021 - 10:10:30 Oct 31, 2021 - 10:10:16 Oct 31, 2021 - 10:10:35 Oct 31, 2021 - 10:10:18 Oct 31, 2021 - 10:10:21 Oct 31, 2021 - 09:10:18 Oct 31, 2021 - 09:10:45 Oct 31, 2021 - 09:10:27 Oct 31, 2021 - 09:10:09 Oct 31, 2021 - 09:10:16

Newer

Installing Boss BD-2 Blues Driver Mods Boss BD-2 Blues Driver Mod

Written By: John Fromel

Comments: 2
Favorites: 0

Installing Boss BD-2 Blues Driver Mods Boss BD-2 Blues Driver Mod

Difficulty

Moderate

Steps

Time Required

01:00:00

Tools

Parts

Step 1 Boss BD-2 Blues Driver Mod

Start by sorting out all the parts in the kit, the parts list above will help!
Open up the back and take a look inside. There are three circuit boards. The main board in the picture to the left, the control board which is connected to the control pots, and a tiny board that only houses the LED.
We will need to get to all three boards so the control knobs and nuts holding the pots will need to be removed as well. There is no need to disconnect the input or output jacks.