Hot Rod Deluxe/ Deville Mods
View
Options
Preview new Authoring Experience
History
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Introduction
Details
Guide Steps
Review
Quiz
Only follow this step if you purchased the OD+ Supreme mod kit and are working on a Hot Rod Deluxe. For Hot Rod Deville owners skip this step, the next step is for you
Remove C33, C35 and C36
Install 22uf/ 500V caps at C33, C35, and C36
It's a good idea to use a dab of silicone RTV under each cap after you've fitted it, but before you've soldered it, to secure it.
All of the capacitors on this step need to be installed with the correct polarity. Failure to do this could cause dangerous and catastrophic results
To install the capacitors with the correct polarity the circuit board will have a "+" sign on it closest to where the positive lead of the cap should be installed
Axial capacitors have an indented ring on the positive side and a "-" sign in an arrow pointing to the negative lead. Radial Capacitors have a longer positive lead and there is a "-" sign in a band closest to the negative lead.
« Previous
Next »
Your contributions are licensed under the open source Creative Commons license.
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.